Products
Variable area flowmeters suitable for liquids and geses. Possible calibration for specific working pressure, temperature and fluid.
Compression springs
Extension springs
Die springs- loads: light, medium, strong, extra strong
Disk springs
Torsion springs
Dimmensions of the die springs ISO 10243:
Seals
O-rings
Cords- round and rectangular
Oil shaft seals
Piston seals
Rod seals
Materials- NBR, EPDM, FKM, VMQ-Silicone and other. O-rings standard sizes or custom made.
Information for our springs bellow:
We offer compression springs with following parameters:
- Wire diameter: 0-12 mm
- Outter diameter: 0-120 mm
- Lenght: 0-2000 mm
To make you an offer we need drawing/sketch or samlpe or parameters above and the details bellw:
- Number coils
- Step (distance between two coils)
- Direction of winding
- Wire material: steel, stainless steel or other
- End type coils: ground, close or open
- Force
- Addditional surface treatment: zinc or other
We offer extension springs with following parameters:
- Wire diameter: 0-12 mm
- Outter diameter: 0-120 mm
- Lenght: 0-2000 mm
To make you an offer we need drawing/sketch or samlpe or parameters above and the details bellw:
- Type of hooks
- Direction of winding
- Wire material: steel, stainless steel or other
- End type coils: ground, close or open
- Force
- Addditional surface treatment: zinc or other
Die springs
According to ISO 10243. Made from flat wire. The color determines the force:
- Color: green, blue, red, yellow
- Outter diameter: 10-63 mm
- Lenght: 25-305 mm
They are also known as a belleville washers. Made accoridng to DIN 2093, made from spring steel usually 51CrV4:
- Outter diameter: 6-358 mm
- Inner diameter : 3.2-242 mm
- Height: 0.4-25 mm
- Thickness: 0.6- 19.6 mm
Made from spring steel or stainless steel. They generate rotating torque. Usually mounted in inner diameter:
- Inner diameter: 1,6-44 mm
- Leg possition angle: 0, 90, 180, 270
Snap rings
Made from spring steel or stainless steel. We offer two models: for bores and shafts.
- For shaft diameter: 4-125 mm
- For bore diameter: 7-125 mm
R-clips
Made from spring steel and according to DIN 11024. Single or double coil:
- Lenght L1: 45-172mm
- For shaft D: 6-55 mm
Endless springs
Made from spring or stainless steel. They can be made with or without temperature treatment.
- Wire: 0-12 mm
- Free lenght Lo: 1000 mm or other
Standard ranges | Thread connection | |||
water | air | G | L | |
l/h | Nm3/h |
| mm | |
120 200 300 400 500 | 6
8
10 |
3/8’’-1/2’’ |
160 | |
600 800 1200 1500 2000 |
15
25 |
3/8’’-1/2’’ |
190 | |
Variable area flowmeters could be equipped with regulating valve. They are made from PVC, Polysulfone, glass or stainless steel. Connection: thread or flange
Drum heaters
- Power: 450W
- Power supply: 230V
- Range: 0-90ºC
- Dimmensions: 1800×440 mm (suitable for 200l drums)
Silicone drum heaters
- Power: 1000W
- Power supply: 230V
- Range: 0-120ºC
- Dimmensions: 1765x110mm (suitable for 200l drums)